Translate

Wednesday 25 September 2013

Restoring a Cordite Bucket.

I often get the feeling that most of the  general public think that antique dealers spend most of their days sat behind a large pedestal desk, doing The Times crossword, drinking Earl Grey tea and getting up only occasionally to speak to a customer and relieve them of a Coutts cheque for the item they have paid full ticket price for. A similar comparison , which I also have experience of is the  publican seen as solely standing behind his bar, serving the occasional pint and enjoying a bit of banter with his jolly faced locals. Like most things life isn't like that.

     Probably, one of the most important jobs , apart from actually buying our stock, is getting it into  the kind of condition which we are proud to have in our shop. Buying stock either privately or at auction means that it is rarely in this condition. Even buying from other dealers generally means that some degree of work needs to be done as our philosophy has always been to get things back into as close to its original condition as possible and sometimes their idea of this is very different from ours.
     So this leads us on to restoration. I love seeking out wonderful things to buy but there can be few things that beat the satisfaction of a job well done in returning something back to its former glory.

   There is nothing like a challenge. In fact, before buying this has to be the first question. Can you do or get the restoration done to a standard you are happy with and at a price that still makes it economically a viable proposition?

    So on to today's task. We were offered this:



       The largest diameter (20 inches) cordite bucket we have ever seen. Interesting, for it size and also it's pre 1900 date inside the lid. Usually when this height they are taller ones that have been reduced in height to make into waste paper buckets. The clue to these can be they sometimes have an applied armourial transfer applied to the side. Some may have originally had transfers on but on most we have seen they look to have been added later. This one is its original size.

Made of  cork covered in leather on the outside with canvas on the inside. So, what are the problems here? Firstly, we have a lifting of the leather on the vertical seam and top.  Secondly, to make it worse the leather has shrunk meaning you will see the cork underneath if it is solely glued down.  Lastly, and further compounding the problems someone has attempted to sort out these problems already.  As any restorer will tell you what they hate more than anything is sorting out someone else's botched job. As dealers we would certainly prefer to buy things in untouched condition. So to anyone out there please remember unless you know what you are doing and how to do it you are better off leaving well alone. Things can easily go wrong and worse case scenario will be you will completely wreck what you are trying to fix. I'm not saying don't do it. Just get it right. It can be expensive  getting things restored. We know that. Sometimes we can't buy something just because we know it will cost too much to do. Sometimes we underestimate the cost and end up making a very short profit. That's how it goes. There can be hidden complications unnoticed when purchasing that don't get seen until you get the piece in the work shop or the problem can be more complicated than first realised. Anyway , if you have job like this and decide to take it on hopefully this will help.

 Where to start.? The previous attempt at restoration had involved using a type of PVA glue to stick down the lifting leather. This thankfully had been unsuccessful because too much of the glue had been applied. That is always a big mistake when gluing anything. So the I first job is to remove the glue. What I did before thinking about taking the above photo was to apply a leather feed to soften the leather and hopefully help loosen off the glue off the leather from the underside. The other reason of this being that the leather needs to be stretched back to cover where it originally was. The product I use is Fiebings 4 Way Care . This works really well as being a liquid it soaks right into the leather as opposed to the leather creams that barely touch the surface.
  Next I used a sharp scalpel to cut through the half dried glue. Having done this I could peel back the leather towards the handle. Once the leather feed had soaked in this made it easier to start peeling of the PVA glue and then apply the feed to the underside of the leather to the top. I should say I have always found it best to apply using a sponge as this allows quick application thus avoiding tide marks.
     The other problem encountered was that the lid had been squashed down leaving it concave. To fix this the cork would need to be soaked and  with weights pushing the top down it should then dry back in its original position. Once this was soaked it was left over the weekend. Now that this is done the next job is to glue the leather down. This was done using a contact adhesive after checking in an area near the handle. The contact glue I am using is  Thixofix ; having used it successfully before on similar task. Others may work equally well. I like this one because its gel type texture makes it so much easier to apply than " runny honey " types. Having applied the glue to both surfaces the leather is pushed down starting at the middle moving outwards to stretch towards the edge.
  Similarly, the vertical split was done in the same way. Here though it was soon realized that the leather would never stretch back far enough to cover its original position so a piece of leather of similar grain and colour was applied underneath. The colour was matched up better by applying a dark wax polish.


       The final thing to do is to polish and improve the somewhat lack lustre dull finish the leather had when the bucket was purchased. The Feiblings had done its job in feeding the leather now a wax polish is needed to give the leather a shinier finish. For this some Harrells khaki wax polish would be used. It is a good quality beeswax based polish that has enough turpentine in it that it will soak into the leather. Applying quickly to again avoid tide marks it is left overnight to really soak in before being buffed up using a soft cloth.



Our gamble has paid off and the bucket is looking as close to original as possible. Now on to move on to the research to see what else we can find out about our cordite bucket. Another job for when we are not to busy with our crossword.

By Simon Clarke.
      

Wednesday 4 September 2013

Great Places to visit near Stow on the Wold

Chastleton House

As we decided to have a bit of a staycation this year as part of my holiday it gave me a great chance to visit some of the many great places, which though so close to Stow, I have not managed to find the time to go to. Rather than write a little about each in this blog I thought I would write a little more about each and fit them in between blogs on the shop and research projects.
  So why not start with probably the closest and the one I have been meaning to go to since the National Trust first took it on and opened it to the public in 1997. Chastleton House and Garden is just over 6 miles from Stow on the Wold and was in the same family for nearly 400 years until the National Trust took it on.
The Trust have gone with a policy of conservation rather major restoration to the house giving it a feeling of being largely untouched for 400 years. The house was built in 1612 and has largely remained unspoilt because of the declining fortunes of the families who lived there and who didn't have the money to make any major changes. As you go into the house you enter the great hall with its long refectory hall. This would have had to have been made and then assembled in the room as there is no way it could have been carried in. There is also a nice lacquer cased clock with movement by one of Joseph Knibbs apprentices, Brounker Watts.

The house has an interesting collection of furniture and  stunning Tapestries now known to be  Sheldon work. There is a charming staircase that leads to one of my favourite rooms the Long Gallery . It is wonderfully atmospheric with its with its barrel vaulted ceiling which being 72 feet long is a rare  survivor.
There is lots more to see so I won't ruin it by posting too many photos. Some other interesting facts to finish. Walter Jones bought the house from Robert Catesby of The Gunpowder Plot fame. He knocked down the house and built Chastleton. The rules of Lawn Croquet were codified and published here in1866 and the Jaques Travelling Patience board which we have sold a couple of over the years was invented here by  Mary Whitmore Jones around 1900.
Finally, when leaving check out the small church next door with some fine brasses hidden under the carpet and the charming Dovecote in the field opposite.


By Simon Clarke.